Black Iron Wire, Black Annealed Iron Wire/Black Tie Binding Wire

• Customization: Available
• Material: Iron Wire
• Cross Sectional Shape: Round
• Model NO.: TYE-25
• Application: Construction Wire Mesh
• Type: Steel Coil
• Wide in Width: 1.6M
• Surface Treatment: Black
• Metal Wire Drawing: Cold Drawing
• Status: Hard State
• Thickness: Metal Thick Wire
• Wire Gauge: 0.5--5mm
• Tensile Strength: 350-550n
• Roll Weight: 25kg/Coil 50kg/Coil Ect
• Transport Package: Big Coil Wire or as Request
• Specification: ISO9001
• Trademark: TianYue
• Origin: Hebei, China
• HS Code: 7217100000
• Production Capacity: 500 Metric Ton/Per Week
• Package Size: 40.00cm * 40.00cm * 14.00cm
• Package Gross Weight: 25.000kg

Product Description

Black Iron Wire, Black Annealed Iron Wire/Black Tie Binding Wire 

1. Material: Low carbon steel rod Q195, SAE1006, 1008

2. Wire gauge / diameter: 8#- 30#, that is 5.0mm-0.5mm

3. Tensile Strength: 350-550 N / mm2 (=35-55kgs/mm2)

4. Packing:

It can be supplied in coils and spool.

As the customs demands. Normally, 25kg/coil, 50kg/coil, 100kgs/coil,

And big coil 500-800kg/coil. Small coil: 0.2- 10kg/coil etc.

PE plastic film inside and weaving cloth or gunny bag outside to protect the wire coils.

5. Production process:

Steel rod coil -Wire Drawing - annealing- Wire Coiling

6. USE: Mostly used in construction or daily use as binding material.
 

Black  iron  wire
Diameter	SWG(mm)	BWG(mm)	MM
8	4.05	4.19	4.00
9	3.66	3.76	4.00
10	3.25	3.40	3.50
11	2.95	3.05	3.00
12	2.64	2.77	2.80
13	2.34	2.41	2.50
14	2.03	2.11	2.50
15	1.83	1.83	1.80
16	1.63	1.65	1.65
17	1.42	1.47	1.40
18	1.22	1.25	1.20
19	1.02	1.07	1.00
20	0.91	0.84	0.90
21	0.81	0.81	0.80
22	0.71	0.71	0.70

Wire rod is a rolled steel product (alloy or non-alloy), manufactured from semi-finished steel with a rectangular, rounded,
hexagonal or squared shape. Especially, fine cross-sections are reached by sequent cold drawing. Wire rod is wrapped around into the coils and also carried in this form.
The steel wire rod is a finished product and is cold-formed for farther processing. Although it has a variety of shapes, it is
mostly rolled round. Diameters often range from 5 to 15 millimeters , with most comply with the ISO standards, makes it easy for the sizes to advance in increments of 1 mm to 20 mm.
All steel wire rods are formed into the coils without any break. This is to ensure that steel wire rods are well-prepared for farther processing (usually by heat treating, coating, and cleaning). The coils' internal diameter often varies from 810 to 910 millimeters, and the external, from 1100 to 1300 millimeters (depends on the capability of mill's equipment). Subsequently, the weight of the coils differs from approximately 600 kg and larger above 2 tons.